Top corner vertical tee (right)
Product Name:Polymer alloy cable trayProduct introductionThe polymer alloy cable tray developed by A
Description
Product Name:
Polymer alloy cable tray
Product introduction
The polymer alloy cable tray developed by Anhui Tiankang (Group) Co., Ltd. according to the American UL568 standard adopts the double-layer hollow structure design and ASA double-layer co-extrusion process. The double-layer hollow structure reduces the deadweight and enhances the bearing capacity according to the mechanical structure principle, which can also play a good heat dissipation effect. The ASA double-layer co-extrusion process greatly improves the anti-aging and anti-ULTRAVIOLET properties of the product and extends the service life of the product. At the same time, the product is made of matte surface by special process, which makes the product stronger and wear-resisting. The product by the national electric power distribution equipment quality supervision and inspection center detect qualified, has high strength, corrosion resistance, anti-aging, light weight, strong flame-retardant, insulation, water resistance, easy installation, long service life, green environmental protection, and many other advantages in one, is an upgrading generation of conventional cable tray products, can achieve "plastic steel".
Scope of application
Polymer alloy cable tray is suitable for laying power cable, control cable, computer cable, lighting distribution line, indoor and outdoor overhead, cable trench, cable tunnel, petrochemical industry, electric power, construction and other fields.
Three innovations: 1. The formulation process is innovatively made of polymer organic materials with high impact strength, good dimensional stability and excellent corrosion resistance.
2. Preparation process Innovation: Double-screw extrusion preparation process and ASA double-layer co-extrusion process are adopted to make the products with strong plasticizing ability and good mixing effect.
3. Innovative double-layer hollow structure design of product structure, reducing dead weight, easy heat dissipation, and enhanced bearing capacity.
Nine Advantages:
High strength 2. Corrosion resistance 3. Light weight 4. Environmental protection 5. Non-conductive 6. Flame retardant 7. Beautiful appearance 8. Long life 9. Easy to install
Method of Model identification
1) general
TK | - | P | Twenty Q | - | - | - | - x - |
The company referred to as" | - | Bridge code material | structure | - | Alien code | - | Bridge width × height |
2) Bridge code material and structure
Bilateral type | Sandwich type | combination | slot | Ladder type | Tray type | Large span type |
D | FX | useful | C | T | P | D |
Polymer alloy bridge performance table
The serial number No. | The name of the | performance |
1. | Material properties | Alloy plastic cable tray |
2. | The bearing performance | High strength, with steel toughness two characteristics |
3. | Product appearance | beautiful |
4. | Leakage proof safety ground | Without the earth |
5. | anti-aging | Suitable for use under any environmental conditions, long service life |
6. | noe | High temperature will not produce harmful substances, there is a good insulation |
7. | Compression performance | good |
8. | Oxygen index | Flame retardant, oxygen index up to 44, level 1 flame retardant (the product automatically goes out after 1 second off fire) |
9. | Corrosion resistance | No chemical reaction occurs in the corrosive environment |
10. | Shielding performance | good |
11. | Water resistance | good |
12. | The scene changes | easy |
13. | The weight of the | light |
14. | The installation time | No need for bolt connection, fast installation |
15. | Defective rate occurs during installation | Standardized decommissioning, site installation, low defect rate |
16. | Negative or not | The inner wall is smooth, and the cable skin will not be damaged when laid |
Browse：
